Crossfire SRT-6 V6-3.2L SC VIN N (2005)
6. Remove the MAP sensor (1) from the charge air cooler.
INSTALLATION
1. Install the MAP sensor to the charge air cooler.
2. Install a new charge air cooler flange gasket (1).
3. Install the charge air cooler (3) to the supercharger.
Tighten the charge air cooler mounting bolts (2) to 25 Nm (18 ft. lbs.).
4. Install the charge air cooler rear mounting bolts.
Tighten the charge air cooler rear mounting bolts (4) to 20 Nm (15 ft. lbs.).
