Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Camshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the camshaft position sensor harness connector (1).
3. Remove the retaining bolt (2).
4. Remove the camshaft position sensor from the cylinder head.
INSTALLATION
NOTE: Lubricate the camshaft position sensor O-ring with engine oil.
1. Inspect the camshaft position sensor O-ring (1) for damage.
2. Lubricate the camshaft position sensor O-ring as necessary.
