chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

A/C Heater Control Module|Page 111 > < A/C Heater Control Module
Page 2
background image

4. Pull out the A/C heater control module by pressing in the catch lugs (1) at the sides.

5. Disconnect the electrical connector (1) by swinging the retaining bow down.
6. Remove the A/C heater control module.

INSTALLATION

WARNING:  ON VEHICLES EQUIPPED WITH AIRBAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING
WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. CONNECT AND ISOLATE THE

A/C Heater Control Module|Page 111 > < A/C Heater Control Module