Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Air Bag Deactivation Module: Description and Operation
The passenger seat occupant simulator is located on the front side of the passenger floor access panel. The module is attached to the access panel with a
plastic wire tie. The multiplexed DC voltage signal received from the passenger airbag switch is converted into a digital signal and sent to the occupant
restraint controller.
The passenger seat occupant simulator receives a multiplexed DC voltage signal from the passenger airbag on/off switch. The signal is then converted
into a digital signal and sent to the occupant restraint controller.
With the passenger airbag On/Off switch in the OFF position, the occupant restraint controller provides a ground for the Passenger Air Bag Off
indicator, and disables the passenger airbag.
With the passenger airbag On/Off switch in the ON position, the occupant restraint controller allows full operation of the passenger airbag.