Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Both side impact airbags are deployed individually by an electrical signal generated by the left or right side impact sensor to which it is connected
through left or right side squib line 1 and line 2 circuits. The hybrid-type inflator assembly for each airbag contains a small canister of highly compressed
inert gas. When the ORC sends the proper electrical signal to the airbag inflator, the electrical energy creates enough heat to ignite chemical pellets
within the inflator. Once ignited, these chemicals burn rapidly and produce the pressure necessary to rupture a containment disk in the inert gas canister.
The inflator and inert gas canister are sealed and connected to a tubular manifold so that all of the released gas is directed into the folded airbag cushion,
causing the cushion to inflate.
As the airbag cushion inflates it will rip open a predetermined area in the driver or passenger door to form a cushion to protect the vehicle occupants
during a side impact collision. Following the airbag deployment, the airbag cushion quickly deflates by venting the inert gas through the loose weave of
the cushion fabric, and the deflated cushion hangs down loosely from the door trim panel.
