Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Seat Belt Buckle: Service and Repair
REMOVAL
1. Move the seat to the full rearward position.
2. Remove the seat track front bolts (1).
3. Move the seat to the full forward position.
NOTE: The seat track rear bolts are easily accessed when the seat back is tilted fully forward.
4. Remove the seat track rear bolts (1).
5. Remove the seat belt bolt (2) holding the seat belt to the seat.
6. Tilt the seat back, to gain access to the bottom of the seat.
7. Disconnect the power seat harness connectors.
8. Carefully remove the seat from the vehicle.
