Crossfire SRT-6 V6-3.2L SC VIN N (2005)
12. Remove the rear weather strip (1) from the cover side retainer (left side shown, right side similar).
13. Drill out the cover side retaining rivets (1).
14. Release the cover side retainers from the rear bow support by sliding the cover down and then out (left side shown, right side similar).
15. Fold the right side of the cover (4) up to gain access to the roof open switch (1).
16. Disconnect the roof open switch harness connector (3).
17. Remove the roof open switch retaining screw from the inside and remove the switch from the top frame (2).
INSTALLATION
INSTALLATION - POWER TOP SWITCH
