Crossfire SRT-6 V6-3.2L SC VIN N (2005)
11. Temporarily reconnect the negative battery cable.
12. Move the seat to the full rearward position.
13. Disconnect the negative battery cable again.
14. Install the seat track front bolts (1). Tighten the front bolts to 50 N.m (37 ft. lbs.).
15. Install the door sill plate (1) by pushing it firmly down onto the retaining clips.
16. Install the ignition key.
17. Do not reconnect the negative battery cable at this time. Perform the Supplemental Restraint System verification test procedure after servicing any
Supplemental Restraint System component. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints Verification Test
