Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Voltage Regulator: Service and Repair
REMOVAL
1. Remove the generator (1).
2. Unclip the plastic voltage regulator cover (4) and remove.
3. Remove the screws (3) attaching the voltage regulator to the generator.
4. Remove the voltage regulator (2).
INSTALLATION
1. Insert the voltage regulator (2), ensure that the ground lug is making contact to the voltage regulator.
2. Install the screws (3) attaching the voltage regulator to the generator.
3. Install the plastic voltage regulator cover (4) with the clips.
4. Install the generator (1).
