chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - Power and Ground Distribution > < Power Distribution Relay|Description and Operation|Page 3456

Crossfire SRT-6 V6-3.2L SC VIN N (2005)

Page 2
background image

1. Install the relay control module harness connectors to the relay control module (1).
2. Install the relay control module into the control module box, pushing the relay control module down until the clips snap into place.
3. Install the control module box lid.
4. Connect the negative battery cable.

Relays and Modules - Power and Ground Distribution > < Power Distribution Relay|Description and Operation|Page 3456