Crossfire SRT-6 V6-3.2L SC VIN N (2005)
2. Install the ignition lock cable (1) to the shift lever assembly by inserting it into the mounting hole and then turning it 90° to the right.
3. Turn the ignition switch to the off/lock position. It should only be possible to move the shift lever out of the Park position when the ignition switch
is in the on/run position and the brake pedal is depressed. It should only be possible to remove the ignition key when the shift lever is in the Park
position and the ignition switch is in the off/lock position.
4. Install the lower instrument panel (2).
