Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Center Link: Service and Repair
DRAG LINK
REMOVAL
1. Remove the steering dampener from the drag link.
2. Remove the nuts attaching the drag link (1) to the pitman arm and the idler arm.
3. Remove the nuts attaching the tie rod ends to the steering knuckles.
4. Using Special Tool C-3894-A (2) Two Jaw Puller remove the tie rod ends (1) from the steering knuckles.
5. Using Special Tool 9168 (2) Ball Joint Puller remove the drag link (1) from the pitman arm and the idler arm.
Note: The right-hand drag link joint is a pivot joint with a swiveling range of maximum 2°. This prevents the drag link from tilting.