Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Steering Gear Seal: Service and Repair
PITMAN SHAFT SEAL
REMOVAL
1. Measure the distance of point "A" between the pitman arm (2) and the steering gear (1) using a caliper gauge.
2. Remove the lower snap ring (4) from the pitman shaft.
3. Remove the pitman arm (3) from the pitman shaft.
4. Remove the upper locking ring (2).
5. Remove the pitman shaft seal (1) from the steering gear housing using a suitable prying tool.
INSTALLATION
CAUTION: DO NOT damage the sealing lip of the pitman shaft seal when sliding it on over the pitman shaft splines.
