Crossfire SRT-6 V6-3.2L SC VIN N (2005)
5. Using Special Tool 9151 Spring Compressor and 9152 Clamping Plates (1), carefully compress the front spring.
6. Remove the nuts from the lower control arm mounting bolts.
7. Carefully remove the lower control arm mounting bolts from the body.
8. Lower the supporting device and swing the lower control arm down while holding the front spring. When enough clearance has been achieved
from the lower control arm and the upper spring perch, remove the front spring from the vehicle.
INSTALLATION
1. Install the compressed front spring (1) with the rubber mount to the vehicle.
