Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Suspension Strut / Shock Absorber: Service and Repair
Front
FRONT SHOCK
REMOVAL
Note: The vehicle must be standing on its wheels when removing the upper shock absorber mounting.
1. Remove the shock absorber upper mounting nut (1).
2. Remove the washer and rubber mounts.
3. Raise and support the vehicle.
4. Remove the shock absorber nut and bolt (1) from the lower control arm. Then remove the shock from the vehicle by pulling it down and out of the
vehicle.
5. Remove any mounting parts from the shock absorber.
6. Inspect all mounting parts for any damage or cracks.
INSTALLATION
1. Install the mounting hardware and bushings to the lower mount and the shock absorber upper mounting stud.
