Crossfire SRT-6 V6-3.2L SC VIN N (2005)
11. Install the transmission mount bolts (1). Tighten the bolts to 45 Nm (33 ft. lbs.).
12. Install the transmission crossmember bolts (2). Tighten the bolts to 45 Nm (33 ft. lbs.).
13. Install the rear exhaust heat shield and nuts (1). Tighten the nuts to 10 Nm (89 inch lbs.).
14. Remove the jack stand supporting the transmission.
15. Install the exhaust system.
16. Lower the vehicle.
