Crossfire SRT-6 V6-3.2L SC VIN N (2005)
8. To remove the opposite bearing cap, turn the yoke over and straighten the universal joint in the open hole. Then, carefully press the end of the
universal joint until the remaining bearing cap can be removed.
ASSEMBLY
CAUTION: If the cross or bearing cap are not straight during assembly, the bearing cap will score the walls of the yoke bore and damage can occur.
1. Apply Extreme Pressure (EP) N.L.G.I. Grade 1 or 2 grease to the inside of the yoke bores.
2. Position the universal joint (1) in the yoke (2) with its grease fitting, if equipped, pointing up.