Crossfire SRT-6 V6-3.2L SC VIN N (2005)
7. Using a soft-faced hammer sharply hit the end of the C/V joint housing to dislodge the housing from the internal circlip on the axle halfshaft.
8. Slide the C/V joint off the end of the halfshaft.
9. Thoroughly clean and inspect the C/V joint assembly for any signs of excessive wear.
INSPECTION
DISASSEMBLING
1. Before disassembling the C/V joint assembly, mark the positions of joint ring, joint hub and the bearing cage with a suitable marking tool (1).
2. Rotate the bearing cage inside of the joint hub (arrow) and remove the bearing balls one at a time.
3. Remove the joint hub and the bearing cage from the joint ring.
