Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Flywheel: Service and Repair
FLEX PLATE / FLYWHEEL
REMOVAL
1. Remove the transmission.
2. Remove the starter.
3. Using Special Tool 9102 Flywheel Locking Tool (1), lock the flywheel by inserting the tool in the starter opening.
4. Remove the clutch if equipped.
5. Remove and discard the flywheel bolts (1).
6. Remove the spacer (2) and the flywheel/flexplate (3).
7. Inspect the rear crankshaft oil seal for leakage. Replace if required.
INSTALLATION
Note: New flywheel/flexplate bolts must be used.
1. Position the flywheel/flexplate (3) and align on the crankshaft pin.
