Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Seals and Gaskets: Service and Repair
Output Flange Seal
OUTPUT FLANGE SEAL REMOVAL
1. Support the transmission.
2. Remove the propeller shaft.
3. Hold the output flange (3) with Special Tool C-3281 (2) Flange Wrench while removing the collared nut (1).
4. Remove the output flange (3) from output shaft (1).
Note: Do not score the transmission seal bore.
5. Pry out transmission output flange seal (2) with a screwdriver.
INSTALLATION
