Crossfire SRT-6 V6-3.2L SC VIN N (2005)
9. Remove the lower wiper module attachment bolt (3) under the cowl ledge (2).
10. Remove the two upper wiper module attachment nuts (1).
CAUTION: Do not allow the wiper module to contact the windshield.
11. Remove the wiper module (4) from the vehicle.
INSTALLATION
CAUTION: During installation, do not allow the wiper module to contact the windshield.
1. Align the wiper module into the cowl over the two upper attachment nut mounting studs (1).
2. Install the two wiper module upper attachment nuts and secure.
3. Install the lower wiper module attachment bolt through the hole (2) in the cowl and secure.