Crossfire SRT-6 V6-3.2L SC VIN N (2005)
Wiper Motor: Service and Repair
Removal and Installation
REMOVAL
WARNING: WINDSHIELD WIPER MECHANISM CAN PINCH, CRUSH, OR IN EXTREME CASES, EVEN SEVER EXTREMITIES.
ALWAYS REMOVE IGNITION KEY WHEN WORKING ON WINDSHIELD WIPER MECHANISM.
1. Disconnect the negative battery cable.
2. Remove the wiper module (1) from the vehicle.
3. Remove the crank arm retaining nut (1) from the wiper motor shaft (2).
4. Scribe a reference mark (3) on both the wiper module and the crank arm for proper alignment during reassembly.
5. Press the crank arm (4) off of the wiper motor shaft (2).
