Fifth Avenue V8-318 5.2L VIN P 2-bbl (1983)
Connecting Rod: Service and Repair
Fig. 15 Piston and rod assembly. V8-318
V8-318 ENGINES
When installing piston and rod assemblies in the cylinders, the compression ring gaps should be diametrically opposite one another and not in line
with the oil ring gap. The oil ring expander gap should be toward the outside of the ``V'' of the engine. The oil ring gap should be turned toward the
inside of the engine ``V.''
Immerse the piston head and rings in clean engine oil and, with a suitable piston ring compressor, insert the piston and rod assembly into the bore. Tap
the piston down into the bore, using the handle of a hammer.
Assemble the pistons to the rods as shown in Fig. 15.
