Fifth Avenue V8-318 5.2L VIN R 4-bbl (1986)
13.
Remove and discard old bushing.
FIGURE 1 - Bushing
14.
Position new bushing into seat back and, using Tool C-4985, compress bushing until it is tight (Figure 1).
15.
Remove tool and retrim seat back.
16.
Carefully position seat back to cushion and install and tighten hinge arm mounting bolts.
17.
Retrim seat cushion.
18.
Connect recliner cable and install and tighten mounting bracket screw, if so equipped.
19.
Install outer hinge arm cover.
20.
Install and tighten power seat switch bezel, if so equipped.
21.
Position seat in vehicle.
22.
On 60-40 drivers seat, install and tighten inner seat belt mounting bolt.
23.
Connect wiring to power seat, if so equipped.
24.
Raise vehicle and install and tighten seat attaching nuts.
25.
Lower vehicle and verify proper seat operation.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
23-13-55-91
0.9 Hrs.
FAILURE CODE:
67 - Noisy Rattles (Loose)