Fifth Avenue V8-318 5.2L VIN R 4-bbl (1986)
FIGURE 1
1.
Raise vehicle on hoist, remove shift linkage and kickdown linkage, drain transmission fluid, and remove transmission pan.
2.
Lower valve body just enough to remove torque converter lock-up spring, replace with supplied spring, PN 4202672. Re-use the existing
lock-up valve, fail safe valve and spring, cover, and screws (Figure 1).
3.
Reinstall valve body and torque screws to 100 inch pounds.
4.
Reinstall transmission oil pan using supplied gasket, PN 4295875. Reconnect shift and kickdown linkage. Lower vehicle and refill using
transmission fluid, PN 4318077. Adjust shift and kickdown linkages per the service manual procedures.
FIGURE 2
5.
Remove ESA and replace with supplied ESA, PN 4379255.
6.
Type Authorized Modification Label, PN 4275086, as shown in Figure 2 and attach near VECI label.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
14-80-16-90 . . . . . . . . . . . . . . . 1.4 Hrs.
FAILURE CODE:
AM - Authorized Modification
