chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Fuel System - Vapor Lock/ Fuel Foaming|Page 1678 > < Fuel System - Vapor Lock/ Fuel Foaming|Page 1676
Page 19
background image

FIGURE 8

Refer to Figure 8 for Electric Fuel Pump Wiring Diagram Schematic.

F.

After-Run Fan (if applicable)

1.

Disconnect the 2-way plug for the ambient air sensor that is located on the fan motor brace.

2.

Tie wrap both ends of the harness back to assure the leads will not be caught in the fan.

Fuel System - Vapor Lock/ Fuel Foaming|Page 1678 > < Fuel System - Vapor Lock/ Fuel Foaming|Page 1676