chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Fuel System - Vapor Lock/ Fuel Foaming|Page 1779 > < Fuel System - Vapor Lock/ Fuel Foaming|Page 1777
Page 10
background image

FIGURE 3-B - 1982 MY ONLY BODY WIRING

FIGURE 3-C - 2 X 5 WAY INST PNL TO BODY CONNECTOR (WIRE END)

8A. Disconnect the body-to-instrument panel 2 X 5 way wedge connector located in left side cowl. Remove and tape back to main harness the
following wires (Figures 3-C and 3-D):

a.

Dark blue wire from cavity #3.

b.

Light blue with black tracer wire from cavity #7 (vehicles equipped with "low fuel warning" only).

FIGURE 3-D - (TERMINAL END OF CONNECTOR)

9A. Insert the two bare terminals of the overlay harness, PN 4368597, into the 2 x 5 wedge connector as follows (Figure 3-D):

a.

Dark blue wire into cavity #3.

b.

Light blue with black tracer into cavity #7.

Fuel System - Vapor Lock/ Fuel Foaming|Page 1779 > < Fuel System - Vapor Lock/ Fuel Foaming|Page 1777