LeBaron L4-135 2.2L VIN B 2-bbl (1982)
FIGURE 6 - FUEL RESERVOIR AND PRESSURE REGULATOR CONNECTIONS
2.
To mount the pressure regulator, tape the pressure regulator bracket template, PN 4275240, to the right side shock tower (Figure 5). (Set
aside solenoid, when so equipped, to gain access.) Carefully locate the template against the fender shield and wheel well, being careful fo
keep the top side of the template level. Center punch three screw hole locations and drill three .165" diameter (#21 drill) holes. Attach the
pressure regulator bracket, PN 4306973, with three selftapping screws, PN 6031991, and tighten securely (Figure 6).
