LeBaron L4-135 2.2L VIN B 2-bbl (1982)
Fuel Pump Overlay HarnessRouting Through BodyFigure 3-A
FIGURE 3-B - 1982 MY ONLY BODY WIRING
6.
Connect the black 6-way overlay body harness connector to the black 6-way sending unit jumper harness connector. Tape connection to the V
support with a minimum of three tape wrappings around the V support. Refer to Figure 3-A for location of spot taping. (No spot taping is
required for wagon models.)
7.
Connect the overlay body harness ground terminal to the body ground selftapping screw (Figure 3-A). On models where no screw exists,
install ground terminal by drilling 1/8" hole and add self-tapping screw, PN 6032114.
NOTE:
FOR 1981 MY ONLY, FOLLOW STEPS 8, 9, AND 10. FOR 1982 MY ONLY, FOLLOW STEPS 8A, 9A, AND 10A.
9-Way Inst Pnl to Body Connector (Wire End) Figure 3-C
