Lebaron Convertible L4-134 2.2L VIN C 2-bbl (1984)
Power Door Lock Actuator: Testing and Inspection
Power Door Lock Motor
To determine which door solenoid is defective, check for proper lock/unlock operation at each door. If none of the solenoids operate, the problem may
be due to a shorted door solenoid. Disconnecting the defective solenoid will allow the other(s) to operate.
To test an individual door solenoid, remove the door trim panel(s) to gain access to the door solenoid. Unplug the door solenoid connector and connect a
test light between the OR wire and a known good ground. Move the switch to the lock position and check for available power. Connect the test light to
the PK wire and move the lock knob to the unlock position again checking the available power. If voltage is present in both switch positions, the door
solenoid is defective. If voltage is not present in one position or neither positions, the door switch or connecting wires may be defective.
