Lebaron Convertible L4-134 2.2L VIN C 2-bbl (1984)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Automatic Idle Speed (AIS) Motor
Fig. 4 Exploded view of throttle body assembly
1.
Disconnect battery ground cable.
2.
Disconnect 6-way connector at throttle body.
3.
Remove AIS motor-to-adapter attaching screws. Do not remove clamp on motor, as damage may result.
4.
Remove two AIS wires from 6-way connector. Lift each locking tab inside connector with a small screwdriver and remove blade terminals. Note
position of wires for assembly reference.
5.
Remove AIS motor from adapter and remove O-rings from motor, Fig. 4.
6.
Reverse procedure to install, using new O-rings. Torque motor attaching screws to 20 inch lbs.
