chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Rear Seat Latch - Replacement
Page 2
background image

1 - Catch

PN 4327469

REPAIR PROCEDURE

1.

Follow steps 1 through 4 of previous repair procedures.

2.

Cut hole in seat back cover carpet for lock-out knob installation.

FIGURE 1 - Rear Seat Latch Assembly

3.

Position escutcheon and install and tighten the two screws to 12-15 inch pounds. (Figure 1).

Install Knob and catch assembly.

5.

Verify proper operation.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

23-41-60-90 ...... ... .. . . . . . . . . .. . ......  0.8 Hrs.

FAILURE CODE:

0X - Wrong Part

Sensors and Switches - Body and Frame > < Rear Seat Latch - Replacement