Lebaron Convertible L4-153 2.5L SOHC VIN B (1993)
Window Regulator: Service and Repair
1. Remove door trim panel.
2. Remove silencer and water shield as necessary.
3. Raise glass to 25 mm (1 in.) below full up position and support glass lift plate to keep the glass from falling.
4. Disconnect power window motor wire connector, if equipped.
5. Remove rivets holding regulator to inner door panel using a 6 mm (0.250 in) drill.
6. Slide regulator lift arm roller from lift plate channel.
7. Remove regulator assembly through access hole in door.
8. Reverse the preceding operation for installation.
