chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Head Restraint Guide - Replacement|Page 3069 > < Head Restraint Guide - Replacement
Page 2
background image

remove guide. Discard the old guide.

If, when inserting the screw driver into the guide, it goes in all the way, proceed as follows for removal.

1.

Remove head restraint.

2.

Move seatback forward.

FIGURE 2

3.

A. Normal and Zipper Type Seatback

Remove hog rings attached to the bottom of seatback (Figure 2).

B.

Panel Type Seatbacks

FIGURE 3

Remove all caps from tapping screws, then all tapping screws from seatback (Figure 3).

FIGURE 4

4.

A.    Normal Type Seatback

Raise seatback cover to an extent that hog rings on upper part of seatback become visible (Figure 4).

Head Restraint Guide - Replacement|Page 3069 > < Head Restraint Guide - Replacement