chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Recall - Fuel Injectors|Page 1565 > < Recall - Fuel Injectors|Page 1563
Page 3
background image

Once the display reads 1986, press the [YES] key.

3.

After the model year is selected, the display will read:

SELECT ENGINE EFI -- TURBO

PRESS F1, F2 FOR MORE

If the display reads EFI -- TURBO, press the [YES] key. If the display reads CARBURETED, press the [F2] key until EFI -- TURBO appears and then press the [YES] key.

4.

After the engine is selected, the display will read:

SELECT TEST ENGINE OFF

PRESS F1, F2 FOR MORE

Press the [F2] key until the display reads CAMPAIGN 397. Press the

[YES] key.

Service Procedure (Continued)

5.

After CAMPAIGN 397 is selected, the display will read:

TURN OFF ACCESSORIES. REMOVE & PLUG PURGE LINE. START ENGINE USE NEUTRAL OR PARK.

FIGURE 2

Make sure that all accessories are off.

Remove and plug the purge line shown in Figure 2. Place car in neutral or park and start engine.

6.

The DRBII will automatically check the logic module to insure that the car is involved in this recall. If the car is not involved, the display will
read:

CAMPAIGN 397 DOES NOT APPLY TO THIS VEHICLE

The DRBII will also check the logic module memory for fault code 52. If code 52 is set, the display will read:

INJECTOR TESTS RICH:
REPLACE INJECTOR.

Abort the test and proceed to Section A 10 (injector fails).

Service Procedure (Continued)

7.

After the DRBII completes the fault code check, the display will read:

HAS THE INJECTOR BEEN CHANGED?

Recall - Fuel Injectors|Page 1565 > < Recall - Fuel Injectors|Page 1563