Lebaron Convertible L4-153 2.5L SOHC VIN K TBI (1986)
Ride Height Sensor: Adjustments
Height Sensor
1.
Check the height sensor arm link for wear or damage.
2.
Loosen the adjustment screw and reposition the plastic sensor as necessary:
-
To raise the vehicle curb height, move the plastic sensor arm upward and tighten the screw.
-
To lower the vehicle curb height, move the plastic sensor arm downward and tighten the screw.
3.
With the vehicle sitting on a level surface, turn the ignition switch to the on position allowing the air compressor to cycle once, and recheck the
vehicles curb height.