Lebaron Convertible L4-153 2.5L SOHC VIN K TBI (1986)
Ride Height Sensor: Service and Repair
1.
Disconnect the battery negative terminal.
2.
Raise vehicle.
3.
Disconnect the wiring harness connector and the connector link from the height sensor.
4.
Remove the mounting screws and remove the height sensor assembly from the frame.
5.
Reverse procedure to install, torquing mounting screws to 70 in.lbs.
6.
Check system for proper operation.
7.
If the vehicle curb height is either too high or too low, check height sensor adjustment.
