chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Front Door Panel > < Interior Door Handle|Page 4040
Page 1
background image

Front Door Latch: Service and Repair

1. Remove trim panel.
2. Remove watershield, as necessary.
3. Disconnect inside handle to latch linkage.
4. Disconnect outside handle to latch linkage.
5. Disconnect lock motor to latch linkage.
6. Remove three torx head screws, used to fasten the latch to the door sheet metal.
7. Remove latch.
8. Reverse this procedure to install.

Front Door Panel > < Interior Door Handle|Page 4040