Lebaron Coupe L4-135 2.2L SOHC Turbo VIN A FI (1989)
Compressor Shaft Seal: Service and Repair
REMOVAL AND INSTALLATION
1. Discharge the refrigerant system.
2. Remove the compressor clutch assembly and shaft key.
Felt Containment Absorber
3. Remove the felt contaminant absorber and retainer. Wash felt with a suitable solvent before installing.
4. Using a mineral spirits based solvent, thoroughly clean and dry the seal end of the compressor to avoid refrigerant system contamination.
Shaft Seal Snap Ring
5. Remove the snap ring shaft seal retainer. Do not use the old snap ring to assemble.
Shaft Seal