chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ECM - Engine Dieout Following Cold Startup|Page 1864 > < ECM - Spark Knock During Hot Engine Idle In DRIVE|Page 1859
Page 1
background image

Powertrain Control Module: All Technical Service Bulletins
ECM - Engine Dieout Following Cold Startup

 Models

1989 AH, AK, AL, AP, Bodies

Subject

Driveway Dieout At Idle or During Gear Engagement - 2.2L EFI With Automatic Trans.

Index

DRIVEABILITY

Date

July 2, 1990

No.

18-21-90

P-1988

(C18-10-0)

BODY CODE LEGEND

AH

LANCER/LEBARON GTS

AK

RELIANT/ARIES

AL

OMNI/HORIZON

AP

SHADOW/SUNDANCE

SYMPTOM/CONDITION

Vehicle may exhibit a driveway'dieout at idle or when shifting. from PARK or NEUTRAL to DRIVE or REVERSE following cold engine starts at
ambient temperatures below 32~F (O~C).

DIAGNOSIS

This condition will only occur on the first start after an overnight soak when the outside temperature is below 32~F 0~C). Following cold engine startup
(using the recommended starting procedure), dieout may occur on extended idle and/or during PARK/NEUTRAL to DRIVE/REVERSE gear
engagement at idle.

Before proceeding to the repair procedure, verify the system is functioning as designed using the appropriate diagnostic test procedure.

PARTS REQUIRED

1 Single Module Engine Controller (SMEC)

2.2L Federal, Automatic

PN 4557522

2.2L California, Automatic

PN 4557524

1 Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

This repair involves the replacement of the original engine controller (SMEC) with a revised unit.

1.

Replace engine controller with appropriate unit as called out in PARTS REQUIRED.

ECM - Engine Dieout Following Cold Startup|Page 1864 > < ECM - Spark Knock During Hot Engine Idle In DRIVE|Page 1859