Lebaron Coupe L4-135 2.2L SOHC Turbo VIN A FI (1989)
Fuel Rail
8.
Remove the fuel rail to intake manifold attaching screws, and pull the fuel rail so that the fuel injectors come straight out of their ports.
9.
Inspect injector O-rings upon removal and discard any that appear damaged or worn.
10.
Cover fuel injector ports while injectors are removed.
INSTALLATION
Fuel Rail And Injector Assembly
1.
Be certain injectors are seated into receiver cups and retainer rings are in place before attempting to install fuel rail assembly.
2.
Install injector wiring harness and fasten into wiring clips. Make sure injector ports are clean and any plugs have been removed.
3.
Lube injector O-rings with clean motor oil and install the injector/rail assembly into the injector ports. Install the 2 fuel rail mounting bolts and
ground straps. (Make sure fuel rail seats evenly with all injectors seated in their ports.) Torque mounting bolts to 200 lb-in (22.5 Nm).
4.
Reconnect detonation (knock) sensor electrical connector.
