chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ECM - Spark Knock During Hot Engine Idle In DRIVE|Page 99 > < ECM - Engine Dieout Following Cold Startup|Page 93
Page 1
background image

Powertrain Control Module: All Technical Service Bulletins
ECM - Spark Knock During Hot Engine Idle In DRIVE

 Models

1989-1990 AH, AK, AL, AP, Bodies

Subject

Spark Knock at Idle in DRIVE - 2.2L EFI Engine With Automatic Transmission

Index

DRIVEABILITY

Date

July 16, 1990

No.

18-22-90

(C18-11-0)

P-2123
BODY CODE LEGEND

AH - LANCER/LEBARON GTS AK - RELIANT/ARIES AL - OMNI/HORIZON AP - SHADOW/SUNDANCE

SYMPTOM/CONDITION

Vehicle may exhibit audible spark knock with engine at idle and transmission in DRIVE when accessory loads are applied.

DIAGNOSIS

This audible spark knock ("pinging" sound) will most likely occur when ambient temperatures are near 80~F (26~C) during a hot engine idle condition
when the transmission is in the DRIVE position, and accessories such as air conditioning or power steering are in use.

Before proceeding to the repair procedure, verify the system is functioning as designed using the appropriate diagnostic test procedures. Be sure to check
for proper basic timing set and correct engine coolant level.

PARTS REQUIRED

1

Engine Controller for 2.2L EFI Engines

1989 Federal, Automatic

PN 4557518

1989 California, Automatic

PN 4557520

1990 Federal, Automatic

PN 4557514

1

Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

This repair involves the replacement of the original engine controller with a revised unit.

1.

Replace engine controller (SMEC/SBEC) with appropriate unit as called out in PARTS REQUIRED.

ECM - Spark Knock During Hot Engine Idle In DRIVE|Page 99 > < ECM - Engine Dieout Following Cold Startup|Page 93