Lebaron Coupe L4-135 2.2L SOHC Turbo VIN A FI (1989)
Seat Belt Retractor: Service and Repair
Front Inner Seat Belt Retractor
Front Passive Restraint System
REMOVAL
1. Disconnect battery.
2. Remove console.
3. Loosen retractor carpet covers by carefully prying the seat belt bezels from the carpet covers.
4. Feed bezels through belt exit hole in carpet cover.
5. Remove retractor mounting bolts.
6. Disconnect retractor wiring if applicable.
INSTALLATION
1. Position retractor on bracket assembly.
2. Install bolt and torque to 40 Nm (350 in. lbs.).
3. Feed bezels through hole in carpet.
4. Reposition carpet cover and snap bezels in belt exit hole of carpet cover.
5. Connect retractor wiring if applicable.
6. Install console, taking care to position retractor carpet cover edges on inside of console carpet sides.