Lebaron Coupe L4-135 2.2L SOHC Turbo VIN A FI (1989)
Fig. 9 Cable Adjusting Screw Tool. 1989 Daytona & LeBaron Coupe/Convertible
Fig. 10 Adjusting Selector Cable. 1989 Daytona & LeBaron Coupe/Convertible
Fig. 11 Adjusting Crossover Cable. 1989 Daytona & LeBaron Coupe/Convertible
7. On Daytona & LeBaron Coupe/Convertible, proceed as follows:
a. Install adjusting screw tool and tighten to 20 inch lbs. Adjusting screw tool, with tethered spacer block, is taped to the shifter support bracket.
b. Adjust selector cable and torque adjusting screw to specification. The selector cable adjusting screw must be properly torqued.
c. Adjust crossover cable and torque adjusting screw to specification. The crossover cable adjusting screw must be properly torqued.
9. On all models, remove lockpin from selector shaft housing and reinstall lockpin so long end is up in selector shaft housing.
10. Check for proper operation and reinstall console, pull-up ring, retaining nut and gearshift knob.
