chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Washer Fluid Level Switch > < Front Wiper & Washer Switch
Page 1
background image

Wiper Switch: Service and Repair
Rear Wiper & Washer Switch

1. Disconnect battery ground cable.
2. Remove cluster bezel, then seven lower trim bezel attaching screws.
3. Remove trim bezel by unsnapping two retaining clips.
4. Disconnect switch assembly electrical connector.
5. Remove two switch attaching screws and the switch.
6. Reverse procedure to install.

Washer Fluid Level Switch > < Front Wiper & Washer Switch