chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Trim Panel > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Headliner: Service and Repair

1. Disconnect battery negative cable.
2. Pull dome lamp downward to disengage from retaining ring in head lining. Separate lens from lamp body and remove bulb. Separate bulb bolder

from lamp body. Remove attaching screw holding retaining ring to roof bow, if equipped.

3. Remove screws holding coat hooks to roof above quarter panels.
4. Remove roof rail and A-pillar mouldings.
5. Remove screws holding sun visors to roof header and disconnect wire connector, if equipped. Remove inboard sun visor hangers.
6. Remove overhead console, if equipped.
7. Pull front reading lamp downward to disengage from retaining ring in head lining and disconnect wire connector. Remove screws holding retaining

ring to roof header, if equipped.

8. Remove pinch welt holding headlining to sun roof opening, if equipped.
9. Remove one quarter trim panel as necessary to clear head lining removal path.

10. Disengage hook and loop fasteners holding head lining to roof above rear window and slide head lining from behind quarter panel.
11. Remove head lining from vehicle.
12. Reverse the preceding operation for installation.

Trim Panel > < Air Bag(s) Arming and Disarming|Service and Repair