chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T > < A/T - Shift Indicator Mandatory Clip Replacement
Page 2
background image

FIGURE 2

4.

Install the PRNDL cable retention clip as shown in Figure 2.

5.

Check the PRNDL alignment again to insure the red indicator is clearly visible next to the selected gear position.

6.

Install the console as described in the Service Manual (PN 81-270-0102, page 8E-50)

POLICY:

Information only.

Transmission Position Switch/Sensor, A/T > < A/T - Shift Indicator Mandatory Clip Replacement