Lebaron Landau L4-153 2.5L SOHC VIN K TBI (1991)
connect type fittings, and all replacements must be of this type due to the higher pressure in this system.
NO-LEAD FILLER TUBE
All catalyst equipped models have a special filler tube. The filler tube also contains a deflector to prevent the addition of fuel by other than an unleaded
fuel nozzle. Labels are attached at the instrument panel and near the fuel door reading "unleaded fuel only" to remind the operator.
PRESSURE/VACUUM FILLER CAP
The loss of liquid fuel or vapor is prevented by using a filler cap which releases pressure when in tank pressure exceeds 10.9 to 13.45 kPa (1.58 to 1.95
psi). Only caps with these specifications may be used as replacements to maintain the integrity of the fuel system. Filler caps must also be rated to
relieve fuel tank vacuum when it reaches between .97 and 2.0 kPa (.14 and .29 psi).
