Lebaron Sedan L4-153 2.5L SOHC Turbo VIN J FI (1991)
2. Reverse this procedure to install.
"B" POST TRIM PANEL
1. Remove "A" post and side garnish moulding, as necessary.
2. Remove side cowl and scuff plate trim panel, as necessary.
3. Remove rear door sill scuff plate.
4. Remove rear door roof rail garnish moulding.
5. Remove front seat belt to sill bolt.
6. Remove front seat belt to "B" post bolt.
7. Remove "B" post trim panel.
8. Reverse this procedure to install and torque all seat belt bolts to 40 Nm (350 inch-pounds).
QUARTER TRIM PANEL
1. Remove seat back.
2. Remove shoulder belt bolt through loop.
3. Remove rear door roof rail garnish moulding, rear door sill scuff plate.
4. Remove two screws, upper and lower.
5. Detach two knob lock fasteners near backlite.
6. Reverse above procedure for installation.
