chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Sensors and Switches - Brakes and Traction Control > < ABS - Warning Lamp ON, `Modulator Fault' Set|Page 3857
Page 1
background image

Electronic Brake Control Module: Service and Repair

1.

Turn ignition off, then disconnect CAB and wiring harness 60-way connector. Ensure ignition is in the OFF position.

2.

Remove CAB module bracket to frame mounting bolts.

3.

Remove CAB module from vehicle.

4.

Reverse procedure to install.

Sensors and Switches - Brakes and Traction Control > < ABS - Warning Lamp ON, `Modulator Fault' Set|Page 3857